Check If Someone Follows Someone on Twitter (2026)
X has no button for it. How to check if someone follows someone on Twitter: X's own checks, a 15-line script that reads the shorter list, and the cost.
Weir Team
Published · Updated · 7 min read
To check if someone follows someone on Twitter, scan the shorter list: the first account's Following or the second account's Followers.
X (Twitter) has no button for it, as of 17 November 2026. For a giveaway rule, outreach or plain curiosity, here are X's own checks, an AI prompt and a script that stops at the match. We run Weir, the API they call.
With Weir connected to Claude or ChatGPT, paste this and swap in your two accounts:
Use Weir to check if @OpenAIDevs follows @OpenAI. Look up both profiles, then read the smaller list: @OpenAIDevs' following or @OpenAI's followers. Pass meta.nextCursor back and stop as soon as you find the account. Tell me yes or no, how many accounts you read, and the credits.
- Compare two countsA's following and B's followers, on their profiles.
- Open the shorter listLogged in on x.com, or through Weir.
- Stop at the matchFound means yes. The end of the list means no.
How to see if someone follows you on X
X's Help Center gives two ways. The Followers link on your profile "will show you how many followers you have and who they are," and X emails you by default "when someone new follows you."
You scroll that list, or export it to search your Twitter followers by name or bio.
Three more checks:
- Do you follow them? X's help says to look for a blue Following button on their profile.
- The "Follows you" tag. Guides point to it on a follower's profile, but X's Help Center doesn't describe it as of 17 November 2026.
- Everyone who doesn't follow you back. Our free not-following-back checker compares both of your lists, and our guide to who doesn't follow back on Twitter explains the results.
X's API gives developers the same answer: its data dictionary lists a connection_status field with values like followed_by, but only for the logged-in user.
Check if someone follows someone else on Twitter
X has no feature for two other accounts. Open the first account's profile, tap Following and look for the second. Or open the second account's Followers and look for the first.
Both counts sit on each profile, so pick the shorter list. @OpenAI follows 4 accounts but has 5.5 million followers, so its Following list answers in seconds.
You must be logged in. On 17 November 2026, x.com sent our logged-out request for @OpenAI's Following list to its log-in page.

A protected account's lists are open only to the followers it approved, Weir's API reference says, so Weir can't read them.
A Twitter follow checker that reads the smaller list
The prompt and the script below use the same logic. They compare the first account's following count with the second account's followers, then read only the smaller list.
Each list call costs 1 credit, plus 1 per account on the page, plus 2 on the first page to look up the account. The prompt at the top also looks up both profiles first, at 3 credits each. We ran it through Weir's MCP server:

@OpenAIDevs follows exactly one account, and it's @OpenAI. One list call settled it.
A 15-line script that stops at the match
This script does the same with Python's standard library. Pass two usernames, and set WEIR_API_KEY to a free key:
import json, os, sys, time, urllib.parse, urllib.request
KEY = {"Authorization": "Bearer " + os.environ["WEIR_API_KEY"]}
def get(path): # a 404 means protected, suspended or missing
req = urllib.request.Request("https://api.weirapp.io/v1/x/users/" + path, headers=KEY)
with urllib.request.urlopen(req, timeout=60) as r: return json.load(r)
a, b = get(sys.argv[1])["data"], get(sys.argv[2])["data"]
if a["followingCount"] <= b["followersCount"]: owner, side, want = a, "following", b["id"]
else: owner, side, want = b, "followers", a["id"] # read the smaller list
print(f"Reading @{owner['username']}'s {side}: {owner[side + 'Count']:,} accounts"); cursor, read = "", 0
for page in range(50): # page cap: about 3,500 accounts
data = get(f"{owner['id']}/{side}?{cursor}"); read += len(data["data"])
if any(x["id"] == want for x in data["data"]): sys.exit(f"Yes: @{a['username']} follows @{b['username']} ({read} read)")
if not data["meta"]["nextCursor"]: sys.exit(f"No: @{a['username']} doesn't follow @{b['username']} ({read} read)")
cursor = "cursor=" + urllib.parse.quote(data["meta"]["nextCursor"]); time.sleep(7)
print(f"Not found in the first {read}: raise the page cap")
Save it as follows.py and run python follows.py OpenAI OpenAIDevs. What it does:
- Compares by id, so a changed username can't fool it.
- Stops two ways. A match means yes, and a
nullcursor means the list ended without one. - Pauses 7 seconds between pages, because the free tier allows 30 requests a minute and this endpoint counts as 3.
We ran it twice on 17 November 2026:

Each run took 3 calls and 13 credits.
What does a follow check cost?
The smaller list sets the bill, and a match near the top ends it early. The worst case is a match at the very end, or none:
Our runs cost 13 credits each; 5,000 credits a month are free; $5 buys 25,000.
To check many accounts against one list, export it once instead. Our guide to exporting a Twitter following list saves it as a CSV, and the mutual followers guide compares two lists.
Is there a Twitter follow date checker?
No. Follow dates aren't public anywhere we looked, as of 17 November 2026:
- X's help pages describe the Following and Followers lists with no date at all.
- X's API reference for following lists has
created_at, which is when an account was made, not when a follow happened. - An X archive's README, from December 2022, lists only account ids and links in following.js and follower.js.
So a "follow date checker" can only report when it first saw a follow in its own saved copies. The order is a hint: X lists follows mostly newest first, Weir's reference says, though it can put some out of order.
For your own account, the new-follower email or alert is the one record with a time on it.
If the check looks wrong
- A 404 error. The account is protected, suspended or gone, and the call costs nothing.
- A follow vanished. X's blocking page says blocking an account you follow "will cause you to unfollow that account (and them to unfollow you)."
- A 429 error. You went too fast, or the free pool is busy. Wait the
Retry-Afterseconds and run it again.
When not to use Weir
- One pair with long lists. TwitterAPI.io's Check Follow Relationship endpoint answers both directions in one call, at $0.001 per call as of November 2026, its docs say.
- Your own followers. X's list and alerts cost nothing.
- You need the follow date. Nobody publishes it, so no tool can give it to you.
- You need a contract with X. Weir isn't licensed by X, so access can change.
X's Terms of Service say you "cannot scrape the Services without X's express written permission," so check what applies to you. This isn't legal advice. Check brands and public accounts, never a private person's circle.
FAQ
How do I check if someone follows someone else on Twitter?
Open the first account's Following list or the second account's Followers, whichever is shorter, and look for the other. You must be logged in to X. By API, read the smaller list and stop at the match.
How do I see if someone follows me on X?
Open your Followers list on your profile, which X says shows who follows you. By default, X also emails you when someone new follows you. To list everyone you follow who doesn't follow back, use a free checker.
Is there a free Twitter follow checker?
X has none. Weir's 5,000 free credits a month cover hundreds of small checks. Our @OpenAI check cost 13 credits with the script, and 10 through an AI app.
Can I see when someone followed someone on Twitter?
No. X's help pages, its API reference and an archive README show no follow date. A tool can only tell you when it first noticed a follow, and the list order is a rough hint.
Sources
Checked 17 November 2026. X's help pages are Wayback copies, dated in brackets:
- X Help Center, Following FAQs (17 October 2026): https://help.x.com/en/using-x/following-faqs
- X Help Center, new user FAQ (16 November 2026): https://help.x.com/en/resources/new-user-faq
- X Help Center, common following issues (2 June 2026): https://help.x.com/en/using-x/common-following-issues
- X Help Center, blocking (16 November 2026): https://help.x.com/en/using-x/blocking-and-unblocking-accounts
- X API data dictionary and Get Following: https://docs.x.com/x-api/fundamentals/data-dictionary and https://docs.x.com/x-api/users/get-following
- An X archive README (last modified 25 December 2022), via BitFolk: https://bitfolk.com/twitter-archive/data/README.txt
- TwitterAPI.io, Check Follow Relationship: https://docs.twitterapi.io/api-reference/endpoint/check_follow_relationship
- X Terms of Service, effective 9 October 2026 (14 November 2026): https://x.com/en/tos
- Weir references and billing: https://docs.weirapp.io/reference/x/getXUserFollowing, https://docs.weirapp.io/reference/x/getXUserFollowers and https://docs.weirapp.io/billing
- Our runs, 17 November 2026: a logged-out request to x.com, three calls through Weir's MCP server (10 credits) and two script runs through its REST API (26 credits)